Wiring

V1.6 Control

The wiring pictured below is color coded to the cable coming from the magazine for Premium models.
Basic models with a tool setter will have a yellow wire connected to the tool setter.

Control Board Layout

Masso G3

Wiring connection locations are just an example. Please make sure your ATC is wired to a open port of the appropriate type and adjust your software configuration accordingly.

3 pair IO example

4 - 6 tool pockets will require 3 pair of IOs for tool tracking.
7-14 tool pockets will require 4 pair of IOs for tool tracking.
Pull up jumpers are required for the IR Sensor and Tool Setter signals and are prepopulated.
The dust cover does not use a pull up jumper.