Tool Setter Position

The tool Setter Position will be the Machine coordinates of X and Y when the spindle is centered above the tool setter.

Tool Setter Placement

Older magazines had the option for the tool setter occupying a position within the magazine.
Now we offer a tool setter that is located within the magazine. A tool setter may also be used that is external to the magazine. This placement must be chosen in the "more options" section. Choose the appropriate placement for your machine.

This option determines when the dust cover will close.

• With an External tool setter the dust cover closes before measuring the tool.

• With an Internal tool setter the dust cover closes After measuring the tool.

Fields

This section contains four editable fields: Input, X Position, Y Position, and Z Start. Click on any of the fields to open edit mode.

When you have entered the desired values, click the green check-mark to save your changes.

X Position

X MACHINE COORDINATE position of the tool setter.

Y Position

Y MACHINE COORDINATE position of the tool setter.

Z Start

Z MACHINE COORDINATE position that the spindle will move to after moving in the XY plane above the tool setter and before beginning the Tool Measurement routine.