This documentation is a work in progress! We are updating regularly so check back soon.

Linear Magazines

Our original tool change solution has been developing since July of 2022. We are currently on version 4.0 and we believe it has reached maturity.

The simplicity of components, installation and easy to configure macros make RapidChange ATC a small investment that delivers exceptional value in terms of time saving indefinitely. Whether you're using your CNC for fun or profit your time is valuable. Not to mention changing tools by hand is a hassle that no one enjoys.

The core mechanics used to automatically load and unload tools is universal with our current and future tool changers.

The Patent Pending RapidChange Sockets have a Lifetime Warranty and we ship our linear magazines with 2 extra sockets. Since we have perfected the socket design 100% of socket damage is caused by running the spindle too fast during set up.

We offer our Linear Magazines in three Models Basic, Pro and Premium. The features of each are listed below.

Basic

Basic Features

  • Fully functioning RapidChange ATC Magazine block.

  • 4-6) M6 x 50mm SHCS for Mounting.

  • 1/4" x 1" Locating Pins for easy installation.

  • Dowel Pin and Locating Disc for easily locating pocket one position.

  • 3D Models of the Sensor/Dust Cover Housings and components for DIY.

  • Web UI to configure macros/subroutines for:
    Centroid, Masso, Onefinity BB, GrblHAL, Mach 3, UCCNC, FluidNC, and Grbl(using Gsender)

  • Plugins for Mach4 and PlanetCNC.

  • Coming soon EdingCNC

Pro

Pro Features

  • All the features of the Basic Magazine.

  • IR Tool Detection with indicator light.

  • V1.6 Control board for the IR Sensor and optional Tool Setter signals. 10-30VDC power supply required.

Premium

Premium Features

  • All the features of the Basic and Pro Magazines.

  • Clear polycarbonate Dust Cover.

  • Servo control with toggle button for manual operation..

  • V1.6 Control board for Dust Cover, IR Sensor and optional Tool Setter signals. 10-30VDC power supply required (If using a separate PSU from the breakout board grounds must be common).

Collet Sizes

  • ER11, ER16 and ER20 use Type-A collets. ER25 and ER32 use Type-UM collets.

  • ER11, ER16 and ER20 models are available in 4, 6 and 8 tool pockets spaced 45mm on center.

  • ER11, ER16 and ER20 Sockets are interchangeable in the magazine. If you change the spindle within this range you only need to replace the sockets.

  • ER25 models are available in 4, and 6 tool pockets spaced 52mm on center.

  • ER32Models currently in Beta.

An unhandled error has occurred. Reload 🗙